PM10CHA060 Mitsubishi - Intelligent Power Module
PM10CHA060 Description
Mitsubishi Electric PM10CHA060 is an intelligent power module (IPM) rated at 600 V and 10 A. It is mostly used in small and mid-size AC drives and servo amplifiers, where built-in gate drive and protection save board space.
USComponent (Young & New Century LLC) supplies power modules, thyristors, diodes and other industrial components, including legacy parts. Contact us for a quote on the PM10CHA060, and please confirm ratings against the datasheet before ordering.
Summary of Features
PM10CHA060 is a 600 V, 10 A Intellimod-3 three phase IGBT inverter output module for 110-230 V line from Powerex.
- Complete output power circuit
- Gate drive circuit
- Protection logic: short circuit, over-current, over temperature, under voltage
- High frequency (20 kHz) output switching inverter
Target Applications
Mitsubishi PM10CHA060 is used for Inverters, small UPS, motion/servo control, AC motor control.
Key Specifications
PM10CHA060 is a 600 V, 10 A Intellimod-3 three phase IGBT inverter output module for 110-230 V line from Powerex. Source: Powerex datasheet PM10CHA060 (Intellimod-3 modules, three phase IGBT inverter output, 10 Amperes / 110-230 Volt line).
| Parameter | Value |
|---|---|
| Manufacturer | Powerex |
| Product type | Intellimod-3 module (intelligent power module) |
| Configuration | Three phase IGBT inverter output with complete drive, control and protection circuitry, isolated from the baseplate |
| VCES | 600 V |
| Collector current | IC ±10 A; ICP ±20 A (peak) |
| Supply voltage VCC (P-N) | 400 V; surge 500 V; protected by OC and SC: 400 V (VD = 13.5 - 16.5 V) |
| Collector dissipation PC | 39 W |
| Control supply VD | 20 V max; 13.5 / 15 / 16.5 V recommended |
| Control inputs | ICIN 20 mA; VCIN 20 V; VFO 20 V; IFO 20 mA max |
| Protection | Overcurrent trip OC 12 / 18 A; short circuit trip SC 27 A typ; overcurrent delay 10 µs; over temperature trip 100 / 110 / 120 °C, reset 90 °C; under voltage trip 11.5 / 12.0 / 12.5 V, reset 12.5 V |
| Circuit current ID | 25 / 40 mA (VN1 - VNC); 7 / 12 mA (VXP1 - VXPC) |
| PWM input frequency | 15 kHz typ / 20 kHz max (3-phase sinusoidal) |
| Dead time | 2.0 µs min (5.0 µs using example interface circuit) |
| Fault output | IFO(L) 10 / 15 mA; minimum pulse width tFO 20 / 40 / 60 µs |
| Temperature | Tj -20 to +150 °C; Tstg -40 to +125 °C; Tc -20 to +100 °C |
| Isolation voltage | 2500 VRMS (AC 1 minute, 60 Hz) |
| Mounting torque | M5 mounting screws 17 kg-cm |
| Weight | 90 g typ |
| Datasheet | Available on this page (PDF) |
Technical document (PDF) | Request a quote for PM10CHA060 (reply within 24 hours)
Related Part Numbers
| PM15CHA-060 600V, 20A | PM20CHA-060 600V, 20A | PM50CHA060 600V, 50A | PM75CHA060 600V, 75A |
| PM10CHA060-2 600V, 10A | PM10CMA060 600V, 10A | PM10CMA060-8 600V, 10A | PM10CNA060 600V 10A |
| PM10CNA060-12 600V, 10A | PM10CNJ060 600V, 10A | PM10CSJ060 600V, 10A | PM10CZF120 1200V, 10A |
| PM10CZF120-7 1200V, 10A | PM1048S03-2158 | PM100RSE120 1200V, 100A | PM100RSE060 600V, 100A |

