7MBP75TEA060 Fuji Electric - Intelligent Power Module
7MBP75TEA060 Description
Fuji Electric makes the 7MBP75TEA060, a 600 V, 75 A intelligent power module (IPM). It is built with a PIM layout, with the input rectifier, brake chopper and three-phase inverter in one package. Because the gate drivers and protection circuits are built in, it is popular in compact motor drives, servo amplifiers and appliance inverters.
USComponent has sourced power semiconductors for maintenance teams and OEMs since 2001. For price and availability of the 7MBP75TEA060, send us a request for quote. Please confirm the specifications against the manufacturer's datasheet before purchase.
Summary of Features
7MBP75TEA060 is a 600 V, 75 A IGBT intelligent power module (Fuji Electric Econo IPM series, 7 in one package) with built-in pre-drivers and protection.
- Temperature protection provided by directly detecting the junction temperature of the IGBTs
- Low power loss and soft switching
- High performance and high reliability IGBT with overheating protection
- Higher reliability because of a big decrease in number of parts in built-in control circuit
Target Applications
Fuji Electric 7MBP75TEA060 finds applications in various industries and systems where high power switching is required.
Key Specifications
7MBP75TEA060 is a 600 V, 75 A IGBT intelligent power module (Fuji Electric Econo IPM series, 7 in one package) with built-in pre-drivers and protection. Source: Fuji Electric datasheet 7MBP75TEA060 (Econo IPM series, 600V / 75A 7 in one-package).
| Parameter | Value |
|---|---|
| Manufacturer | Fuji Electric |
| Product type | IGBT-IPM (intelligent power module), Econo IPM series |
| Configuration | 7 in one package: 3-phase IGBT inverter + brake, with pre-drivers and protection |
| DC bus voltage VDC | 450 V (surge 500 V; short operating 200 - 400 V) |
| Collector-emitter voltage VCES | 600 V |
| Inverter collector current | IC 75 A DC; ICP 150 A (1 ms); -IC 75 A |
| Inverter collector power dissipation PC | 198 W (one transistor) |
| Brake | IC 50 A DC; ICP 100 A (1 ms); diode IF 50 A; PC 198 W; VCE(sat) 2.2 V max (IC = 50 A, terminal); diode VF 3.3 V max |
| Inverter VCE(sat) | 2.4 V max at terminal (IC = 75 A); chip 2.0 V typ |
| Inverter FWD forward voltage VF | 2.6 V max at terminal (-IC = 75 A); chip 1.6 V typ |
| Switching | ton 1.2 µs min; toff 3.6 µs max; trr 0.3 µs max (VDC = 300 V, IC = 75 A, Tj = 125 °C) |
| Maximum avalanche energy PAV | 40 mJ min (non-repetitive) |
| Pre-driver supply voltage VCC | 20 V max (recommended 13.5 / 15.0 / 16.5 V) |
| Input signal threshold Vin(th) | ON 1.00 / 1.35 / 1.70 V; OFF 1.25 / 1.60 / 1.95 V (min / typ / max) |
| Protection | IGBT chip over heating protection TjOH 150 °C min (hysteresis 20 °C); over current protection IOC 113 A min (inverter), 75 A min (brake) at Tj = 125 °C; SC protection delay 8 µs max; under voltage protection VUV 11.0 - 12.5 V; alarm hold time tALM 2.0 ms typ (25 °C) |
| Thermal resistance Rth(j-c) max | Inverter IGBT 0.63 / FWD 0.855; brake IGBT 0.63 °C/W; Rth(c-f) 0.05 °C/W typ |
| Junction temperature Tj | 150 °C |
| Operating case temperature | -20 to +100 °C |
| Storage temperature | -40 to +125 °C |
| Solder temperature Tsol | 260 °C max |
| Isolating voltage Viso | AC 2500 V (1 min) |
| Screw torque | Mounting M5: 3.5 N·m max |
| Datasheet | Available on this page (PDF) |
Technical document (PDF) | Request a quote for 7MBP75TEA060 (reply within 24 hours)
Related Part Numbers
| 6MBP75TEA060 600V, 75A | 7MBP100TEA060 600V, 100A | 7MBP50TEA060 600V, 50A | 7MBP150TEA060 600V, 150A |
| 7MBP75TEA120 1200V, 75A | 6MBP100TEA060 600V, 100A | 6MBP150TEA060 600V, 150A | 6MBP50TEA060 600V, 50A |
| 7MBP75SD060 600V, 75A | 7MBP75VDA060-50 600V, 75A | 7MBP75RTB060 600V, 75A | 7MBP75VDA120-50 1200V, 75A |
| 7MBP75RJ120 1200V, 75A | 7MBP75VDN120-50 1200V, 75A | 7MBP75RE120 1200V, 75A | 7MBP75VFN060-50 600V, 75A |

