7MBP75RJ120 Fuji Electric - Intelligent Power Module

Category: Intelligent Power Modules (IPM)

Specifications: 1200V, 75A

7MBP75RJ120, Fuji, Fuji Electric power module

Availability and lead time are confirmed in our quote.

  • ✓ Quote within 24 hours
  • ✓ Original manufacturer parts, inspected before shipping
  • ✓ Credit cards and NET terms accepted

Or email sales@uscomponent.com or call 1-281-968-0718.

7MBP75RJ120 Description

Rated at 1200 V and 75 A, the Fuji Electric 7MBP75RJ120 is an intelligent power module (IPM). It is built with a PIM layout, with the input rectifier, brake chopper and three-phase inverter in one package. An IPM like this simplifies inverter design: drive, short-circuit and over-temperature protection are already inside the package.

Looking for a replacement 7MBP75RJ120? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

7MBP75RJ120 is a 1200 V, 75 A IGBT intelligent power module (IGBT-IPM R series, 7 in one package) from Fuji Electric.

  • Temperature protection provided by directly detecting the junction temperature of the IGBTs
  • Low power loss and soft switching
  • High performance and high reliability IGBT with overheating protection
  • Both P-side and N-side alarm output available
  • Higher reliability because of a big decrease in number of parts in built-in control circuit

Target Applications

Fuji Electric 7MBP75RJ120 finds applications in various industries and systems where high power switching is required.

Key Specifications

7MBP75RJ120 is a 1200 V, 75 A IGBT intelligent power module (IGBT-IPM R series, 7 in one package) from Fuji Electric. Source: Fuji Electric datasheet 7MBP75RJ120 (IGBT IPM R-series 1200V class, 1200V / 75A 7 in one-package).

ParameterValue
ManufacturerFuji Electric
Product typeIGBT-IPM (intelligent power module), R series
Configuration7 in one package: 3-phase IGBT inverter + brake, with pre-drivers and protection
DC bus voltage VDC900 V (surge 1000 V; short operating 200 - 800 V)
Collector-emitter voltage VCES1200 V
Inverter collector currentIC 75 A DC; ICP 150 A (1 ms); -IC 75 A
Inverter collector power dissipation PC500 W (one transistor)
Brake (DB)IC 25 A DC; ICP 50 A (1 ms); diode IF 25 A; PC 198 W; VCE(sat) 2.6 V max (IC = 25 A); diode VF 3.3 V max
Inverter VCE(sat)2.6 V max (IC = 75 A, terminal)
Inverter FWD forward voltage VF3.0 V max (-IC = 75 A, terminal)
Switchington 1.2 µs min; toff 3.6 µs max; trr 0.3 µs max (VDC = 600 V, IC = 75 A, Tj = 125 °C)
Pre-driver supply voltage VCC20 V max (15 V typ)
Input signal threshold Vin(th)ON 1.00 / 1.35 / 1.70 V; OFF 1.25 / 1.60 / 1.95 V (min / typ / max)
ProtectionIGBT chip over heating protection TjOH 150 °C min (hysteresis 20 °C); case over heating TcOH 110 - 125 °C; over current protection IOC 113 A min (inverter), 38 A min (brake) at Tj = 125 °C; SC protection delay 12 µs max; under voltage protection VUV 11.0 - 12.5 V; alarm hold time tALM 2.0 ms typ (25 °C)
Thermal resistance Rth(j-c) maxInverter IGBT 0.25 / FWD 0.73; brake IGBT 0.63 °C/W; Rth(c-f) 0.05 °C/W typ
Junction temperature Tj150 °C
Operating case temperature-20 to +100 °C
Storage temperature-40 to +125 °C
Isolating voltage VisoAC 2.5 kV (1 min)
Screw torqueTerminal M5 / mounting M5: 3.5 N·m max (recommended 2.5 - 3.0 N·m)
Weight450 g typ
DatasheetAvailable on this page (PDF)

Technical document (PDF)  |  Request a quote for 7MBP75RJ120 (reply within 24 hours)

Related Part Numbers

6MBP75RJ120
1200V, 75A
7MBP50RJ120
1200V, 50A
7MBP25RJ120
1200V, 25A
6MBP25RJ120
1200V, 25A
6MBP50RJ120
1200V, 50A
7MBP75RTB060
600V, 75A
7MBP75RE120
1200V, 75A
7MBP75SD060
600V, 75A
7MBP75RA120-59
1200V, 75A
7MBP75TEA060
600V, 75A
7MBP75RA120-05
1200V, 75A
7MBP75TEA120
1200V, 75A
7MBP75RA060-01
600V, 75A
7MBP75VDA060-50
600V, 75A
7MBP75RA-120
1200V, 75A
7MBP75VDA120-50
1200V, 75A