HS151DR-HD6050 Crydom - Relays

HS151DR-HD6050 Description

The Crydom HS151DR-HD6050 is a solid state relay, rated for 660 V and 40 A. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

We help engineers and repair technicians find parts like the HS151DR-HD6050, including obsolete ones. Send a quick RFQ for current pricing and delivery. Before ordering, please confirm ratings and pin-out with the official datasheet.

Summary of Features

Target Applications

Crydom HS151DR-HD6050 is used for ready-to-install switching of AC loads such as heaters and furnaces in control cabinets, with the SSR pre-mounted on a matched heat sink.

Key Specifications

Crydom HS151DR-HD6050 is a DIN-rail mounted SSR and heat sink assembly (HS151DR Series) with Crydom HD6050, 40 A AC output @ 40°C, 48-660 VAC, DC control 3-32 VDC, thermal pad installed. Source: Crydom HS151DR Series Assemblies datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage (47-63 Hz)	48-660 Vrms
Maximum load current @ 40°C	40 Arms
Minimum load current	0.04 Arms
Transient overvoltage	1200 Vpk
Maximum off-state leakage @ rated voltage	10 mArms
Minimum off-state dv/dt	500 V/µs
Maximum surge current (16.6 ms)	625 Apk
Maximum on-state voltage drop @ rated current	1.7 Vpk
Maximum I²t for fusing (8.3 ms)	1620 A²s
Input
Control voltage range	3-32 VDC
Typical input current	2.0 mA
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output/base	4000 Vrms
Ambient operating temperature	-40 to 80°C
Weight (typical)	1.11 lb (437 g)

Technical document (PDF)  |  Request a quote for HS151DR-HD6050 (reply within 24 hours)