HS151DR-CC2450W3U Crydom - Relays

HS151DR-CC2450W3U Description

The Crydom HS151DR-CC2450W3U is a solid state relay, rated for 280 V and 40 A. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent has sourced power semiconductors for maintenance teams and OEMs since 2001. For price and availability of the HS151DR-CC2450W3U, send us a request for quote. Please confirm the specifications against the manufacturer's datasheet before purchase.

Summary of Features

Target Applications

Crydom HS151DR-CC2450W3U is used for ready-to-install switching of AC loads such as heaters and furnaces in control cabinets, with the SSR pre-mounted on a matched heat sink.

Key Specifications

Crydom HS151DR-CC2450W3U is a DIN-rail mounted SSR and heat sink assembly (HS151DR Series) with Crydom CC2450W3U (dual channel), 40 A AC output @ 40°C, 24-280 VAC, DC control 4-32 VDC, thermal pad installed. Source: Crydom HS151DR Series Assemblies datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage (47-63 Hz)	24-280 Vrms
Maximum load current @ 40°C	40 Arms
Minimum load current	0.15 Arms
Transient overvoltage	600 Vpk
Maximum off-state leakage @ rated voltage	0.1 mArms
Minimum off-state dv/dt	500 V/µs
Maximum surge current (16.6 ms)	750 Apk
Maximum on-state voltage drop @ rated current	1.3 Vpk
Maximum I²t for fusing (8.3 ms)	2320 A²s
Input
Control voltage range	4-32 VDC
Typical input current	10 mA @ 12 VDC
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output/base	4000 Vrms
Ambient operating temperature	-40 to 80°C
Weight (typical)	1.17 lb (450 g)

Technical document (PDF)  |  Request a quote for HS151DR-CC2450W3U (reply within 24 hours)