HS122DR-D2450 Crydom - Relays

HS122DR-D2450 Description

The Crydom HS122DR-D2450 is a solid state relay, rated for 280 V and 45 A. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

USComponent (Young & New Century LLC) supplies power modules, thyristors, diodes and other industrial components, including legacy parts. Contact us for a quote on the HS122DR-D2450, and please confirm ratings against the datasheet before ordering.

Summary of Features

Target Applications

Crydom HS122DR-D2450 is used for ready-to-install switching of AC loads such as heaters and furnaces in control cabinets, with the SSR pre-mounted on a matched heat sink.

Key Specifications

Crydom HS122DR-D2450 is an SSR and heat sink assembly (HS122DR Series) with Crydom D2450, 45 A AC output @ 40°C, 24-280 VAC, DC control 3-32 VDC. Source: Crydom HS122DR Series Assemblies datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage (47-63 Hz)	24-280 Vrms
Maximum load current @ 40°C	45 Arms
Minimum load current	0.04 Arms
Transient overvoltage	600 Vpk
Maximum off-state leakage @ rated voltage	10 mArms
Minimum off-state dv/dt	500 V/µs
Maximum surge current (16.6 ms)	625 Apk
Maximum on-state voltage drop @ rated current	1.6 V
Maximum I²t for fusing (8.3 ms)	1620 A²s
Input
Control voltage range	3-32 VDC
Input current	3.4 mA @ 5 VDC
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output/base	4000 Vrms
Ambient operating temperature	-40 to 80°C
Weight (typical)	1.43 lb (649 g)

Technical document (PDF)  |  Request a quote for HS122DR-D2450 (reply within 24 hours)