HDC60D160 Crydom - Relays

HDC60D160 Description

The Crydom HDC60D160 is a solid state relay, rated for 48 V and 160 A. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent (Young & New Century LLC) supplies power modules, thyristors, diodes and other industrial components, including legacy parts. Contact us for a quote on the HDC60D160, and please confirm ratings against the datasheet before ordering.

Summary of Features

Target Applications

Crydom HDC60D160 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom HDC60D160 is a 160 A heavy-duty DC output panel-mount solid state relay (HDC Series), MOSFET output, 7-48 VDC, DC control 4.5-32 VDC, stud terminals, LED status indicator. Source: Crydom HDC Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	7-48 VDC
Blocking voltage	60 VDC
Rated load current	160 A
Rated load current IEC 60947-4-1 DC-1	160 (up to 48 VDC) Adc
Rated load current IEC 60947-4-1 DC-3	25 (up to 48 VDC) FLA
Minimum load current	2.5 mA
Maximum surge current (10 ms)	470 Adc
Maximum off-state leakage @ rated voltage	0.1 mA
Maximum on-state voltage drop @ rated current	0.56 VDC
Thermal resistance junction to case (Rjc)	0.36 °C/W
Maximum on-state resistance (RDS-on)	3.5 mOhm
Maximum PWM	1000 Hz
Input
Control voltage range	4.5-32 VDC
Must turn-off voltage	4.2 VDC
Input current	23 mA (min) / 45 mA (max)
General
Dielectric strength, input/output/base	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	0.75 lb (340 g)

Technical document (PDF)  |  Request a quote for HDC60D160 (reply within 24 hours)