HDC200D160 Crydom - Relays

HDC200D160 Description

Crydom HDC200D160 is a solid state relay. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

USComponent has been supplying power semiconductors since 2001, including discontinued and hard-to-find part numbers. Send us an RFQ for the HDC200D160 and we will reply with price, condition and lead time. Please check the manufacturer's datasheet to confirm ratings, package and pin-out before you order.

Summary of Features

Target Applications

Crydom HDC200D160 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom HDC200D160 is a 160 A heavy-duty DC output panel-mount solid state relay (HDC Series), MOSFET output, 7-150 VDC, DC control 4.5-32 VDC, stud terminals, LED status indicator. Source: Crydom HDC Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	7-150 VDC
Blocking voltage	200 VDC
Rated load current	160 A
Rated load current IEC 60947-4-1 DC-1	160 Adc
Rated load current IEC 60947-4-1 DC-3	25 FLA
Rated load current UL 508 motor controller	25 FLA / 3 HP
Minimum load current	2.5 mA
Maximum surge current (10 ms)	1600 Adc
Maximum off-state leakage @ rated voltage	0.2 mA
Maximum on-state voltage drop @ rated current	0.64 VDC
Thermal resistance junction to case (Rjc)	0.23 °C/W
Maximum on-state resistance (RDS-on)	4.0 mOhm
Maximum PWM	1000 Hz
Input
Control voltage range	4.5-32 VDC
Must turn-off voltage	4.2 VDC
Input current	23 mA (min) / 45 mA (max)
General
Dielectric strength, input/output/base	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	0.75 lb (340 g)

Technical document (PDF)  |  Request a quote for HDC200D160 (reply within 24 hours)