HDC60A120 Crydom - Relays

HDC60A120 Description

Crydom HDC60A120 is a solid state relay rated at 48 V and 120 A. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

Looking for a replacement HDC60A120? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom HDC60A120 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom HDC60A120 is a 120 A heavy-duty DC output panel-mount solid state relay (HDC Series), MOSFET output, 7-48 VDC, AC control 90-140 VAC, stud terminals, LED status indicator. Source: Crydom HDC Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	7-48 VDC
Blocking voltage	60 VDC
Rated load current	120 A
Rated load current IEC 60947-4-1 DC-1	120 (up to 48 VDC) Adc
Rated load current IEC 60947-4-1 DC-3	17 (up to 48 VDC) FLA
Minimum load current	2.5 mA
Maximum surge current (10 ms)	360 Adc
Maximum off-state leakage @ rated voltage	0.1 mA
Maximum on-state voltage drop @ rated current	0.53 VDC
Thermal resistance junction to case (Rjc)	0.42 °C/W
Maximum on-state resistance (RDS-on)	4.32 mOhm
Maximum PWM	1000 Hz (DC input models)
Input
Control voltage range	90-140 VAC
Must turn-off voltage	35 VAC
Input current	31 mA (min) / 33 mA (max)
General
Dielectric strength, input/output/base	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	0.75 lb (340 g)

Technical document (PDF)  |  Request a quote for HDC60A120 (reply within 24 hours)