DRA3P48E4 Crydom - Relays

DRA3P48E4 Description

Crydom makes the DRA3P48E4, a 480 V, 4.2 A solid state relay. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Need the DRA3P48E4? USComponent stocks and sources power modules for repair shops, OEMs and maintenance teams worldwide. Request a quote and we'll confirm availability and lead time. Always compare against the datasheet before ordering.

Summary of Features

Target Applications

Crydom DRA3P48E4 is used for three-phase switching of industrial heaters and furnaces, plastic processing machines, process heating and motor loads.

Key Specifications

Crydom DRA3P48E4 is a 4.2 A three-phase DIN-rail solid state contactor (DRA3P Series), 48-510 VAC load, control 18-28 VDC, zero voltage turn-on, built-in overvoltage protection, LED input indicator. Source: Crydom DRA3P Series datasheet (Rev 090512). Values at 25°C unless noted.

Parameter	Value
Output (3-phase)
Operating voltage (47-63 Hz)	48-510 Vrms
Maximum resistive load current UL / AC51	4.2 / 2.4 Arms
Maximum motor load current UL / AC53	3.4 / 2.1 Arms
Transient overvoltage	1200 Vpk
Minimum load current	0.15 Arms
Maximum off-state leakage @ rated voltage	1.0 mArms
Minimum off-state dv/dt	500 V/µs
Maximum on-state voltage drop	1.3 Vpk per channel
Maximum surge current (50/60 Hz, 1 cycle)	285/300 Apk
Maximum I²t for fusing (1/2 cycle, 50/60 Hz)	410/375 A²s
Switching type	zero voltage turn-on
Input
Control voltage range	18-28 VDC
Minimum turn-on / turn-off voltage	18 / 4 VDC
Input current	15-25 mA
Nominal input impedance	1.2 kOhm
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-20 to 60°C
Weight (typical)	4.75 oz (135 g)

Technical document (PDF)  |  Request a quote for DRA3P48E4 (reply within 24 hours)