DRA3P48D2 Crydom - Relays

DRA3P48D2 Description

Rated at 480 V and 2.4 A, the Crydom DRA3P48D2 is a solid state relay. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

USComponent has sourced power semiconductors for maintenance teams and OEMs since 2001. For price and availability of the DRA3P48D2, send us a request for quote. Please confirm the specifications against the manufacturer's datasheet before purchase.

Summary of Features

Target Applications

Crydom DRA3P48D2 is used for three-phase switching of industrial heaters and furnaces, plastic processing machines, process heating and motor loads.

Key Specifications

Crydom DRA3P48D2 is a 2.4 A three-phase DIN-rail solid state contactor (DRA3P Series), 48-510 VAC load, control 4-6 VDC, zero voltage turn-on, built-in overvoltage protection, LED input indicator. Source: Crydom DRA3P Series datasheet (Rev 090512). Values at 25°C unless noted.

Parameter	Value
Output (3-phase)
Operating voltage (47-63 Hz)	48-510 Vrms
Maximum resistive load current UL / AC51	2.4 / 2.4 Arms
Maximum motor load current UL / AC53	2.1 / 2.1 Arms
Transient overvoltage	1200 Vpk
Minimum load current	0.15 Arms
Maximum off-state leakage @ rated voltage	1.0 mArms
Minimum off-state dv/dt	500 V/µs
Maximum on-state voltage drop	1.3 Vpk per channel
Maximum surge current (50/60 Hz, 1 cycle)	285/300 Apk
Maximum I²t for fusing (1/2 cycle, 50/60 Hz)	410/375 A²s
Switching type	zero voltage turn-on
Input
Control voltage range	4-6 VDC
Minimum turn-on / turn-off voltage	4 / 2 VDC
Input current	17-35 mA
Nominal input impedance	120 Ohm
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-20 to 60°C
Weight (typical)	4.75 oz (135 g)

Technical document (PDF)  |  Request a quote for DRA3P48D2 (reply within 24 hours)