DRA3P48D4 Crydom - Relays

DRA3P48D4 Description

Rated at 480 V and 4.2 A, the Crydom DRA3P48D4 is a solid state relay. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Looking for a replacement DRA3P48D4? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom DRA3P48D4 is used for three-phase switching of industrial heaters and furnaces, plastic processing machines, process heating and motor loads.

Key Specifications

Crydom DRA3P48D4 is a 4.2 A three-phase DIN-rail solid state contactor (DRA3P Series), 48-510 VAC load, control 4-6 VDC, zero voltage turn-on, built-in overvoltage protection, LED input indicator. Source: Crydom DRA3P Series datasheet (Rev 090512). Values at 25°C unless noted.

Parameter	Value
Output (3-phase)
Operating voltage (47-63 Hz)	48-510 Vrms
Maximum resistive load current UL / AC51	4.2 / 2.4 Arms
Maximum motor load current UL / AC53	3.4 / 2.1 Arms
Transient overvoltage	1200 Vpk
Minimum load current	0.15 Arms
Maximum off-state leakage @ rated voltage	1.0 mArms
Minimum off-state dv/dt	500 V/µs
Maximum on-state voltage drop	1.3 Vpk per channel
Maximum surge current (50/60 Hz, 1 cycle)	285/300 Apk
Maximum I²t for fusing (1/2 cycle, 50/60 Hz)	410/375 A²s
Switching type	zero voltage turn-on
Input
Control voltage range	4-6 VDC
Minimum turn-on / turn-off voltage	4 / 2 VDC
Input current	17-35 mA
Nominal input impedance	120 Ohm
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-20 to 60°C
Weight (typical)	4.75 oz (135 g)

Technical document (PDF)  |  Request a quote for DRA3P48D4 (reply within 24 hours)