DRA1-SPFE240D25 Crydom - Relays

DRA1-SPFE240D25 Description

The DRA1-SPFE240D25 is a solid state relay made by Crydom. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Looking for a replacement DRA1-SPFE240D25? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom DRA1-SPFE240D25 is used for control cabinet and PLC output interfacing, switching heaters, solenoids, valves, contactors and indicator loads in industrial automation and building control.

Key Specifications

Crydom DRA1-SPFE240D25 is a 10 mm single-channel DIN-rail SSR assembly (DRA1 SPF Series), AC output 12-280 VAC, 10 A, DC control 15-32 VDC, zero voltage turn-on. Source: Crydom DRA1 SPF Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	12-280 VAC
Maximum load current	10 Arms
Transient overvoltage	600 Vpk
Minimum load current	0.06 Arms
Maximum off-state leakage @ rated voltage	0.1 mArms
Minimum off-state dv/dt	500 V/µs
Maximum 1 cycle surge current (50/60 Hz)	239/250 Apk
Maximum I²t for fusing (50/60 Hz, 1/2 cycle)	285/260 A²s
Maximum on-state voltage drop @ rated current	1.6 Vpk
Input
Control voltage range	15-32 VDC
Minimum turn-on / must turn-off voltage	15 / 1.0 VDC
Typical input current	15 mA
Nominal input impedance	1500 Ohm
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output	4000 Vrms
Ambient operating temperature	-30 to 80°C

Technical document (PDF)  |  Request a quote for DRA1-SPFE240D25 (reply within 24 hours)