DRA1-MCXE380D5 Crydom - Relays

DRA1-MCXE380D5 Description

The DRA1-MCXE380D5 from Crydom is a solid state relay with a 380 V / 5 A rating. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent has been supplying power semiconductors since 2001, including discontinued and hard-to-find part numbers. Send us an RFQ for the DRA1-MCXE380D5 and we will reply with price, condition and lead time. Please check the manufacturer's datasheet to confirm ratings, package and pin-out before you order.

Summary of Features

Target Applications

Crydom DRA1-MCXE380D5 is used for control cabinet and PLC output interfacing, switching heaters, solenoids, valves, contactors and indicator loads in industrial automation and building control.

Key Specifications

Crydom DRA1-MCXE380D5 is a 10 mm single-channel DIN-rail SSR assembly (DRA1 MCX Series), AC output 48-380 VAC, 5 A, DC control 15-32 VDC, LED status indicator. Source: Crydom DRA1 MCX Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	48-380 VAC (voltages above 380 V damage the output terminals)
Maximum load current	5 Arms
Minimum load current	0.06 Arms
Transient overvoltage	1200 Vpk
Maximum off-state leakage @ rated voltage	0.1 mArms
Minimum off-state dv/dt	500 V/µs
Maximum 1 cycle surge current (50/60 Hz)	239/250 Apk
Maximum I²t for fusing (50/60 Hz, 1/2 cycle)	285/260 A²s
Maximum on-state voltage drop @ rated current	1.4 Vpk
Input
Control voltage range	15-32 VDC
Must turn-on / turn-off voltage	15.0 VDC / 1.0 VDC
Typical input current	15 mA
Nominal input impedance	1500 Ohm
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output/base	4000 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	36.4 g

Technical document (PDF)  |  Request a quote for DRA1-MCXE380D5 (reply within 24 hours)