DRA1-MP120D3 Crydom - Relays

DRA1-MP120D3 Description

DRA1-MP120D3 is a 120 V, 3 A solid state relay made by Crydom. Typical uses include temperature control of heaters, packaging and plastics machinery, and general industrial load switching.

Looking for a replacement DRA1-MP120D3? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom DRA1-MP120D3 is used for control cabinet and PLC output interfacing, switching heaters, solenoids, valves, contactors and indicator loads in industrial automation and building control.

Key Specifications

Crydom DRA1-MP120D3 is a 10 mm single-channel DIN-rail SSR assembly (DRA1 MP Series), normally open AC output 12-140 VAC, 3 A, DC control 3-32 VDC. Source: Crydom DRA1 MP Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output (AC)
Operating voltage	12-140 VAC
Maximum load current	3 Arms
Transient overvoltage	400 Vpk
Minimum load current	0.02 Arms
Maximum off-state leakage @ rated voltage	5 mArms
Minimum off-state dv/dt	200 V/µs
Maximum 1 cycle surge current (50/60 Hz)	86/90 Apk
Maximum I²t for fusing (50/60 Hz, 1/2 cycle)	39/36 A²s
Maximum on-state voltage drop @ rated current	1.6 Vpk
Input
Control voltage range	3-32 VDC
Typical input current	2.6 mA
Nominal input impedance	1500 Ohm
Must turn-on / turn-off voltage	3.0 / 1.0 VDC
Maximum turn-on / turn-off time	8.33 ms / 8.33 ms
General
Dielectric strength, input/output/base	4000 Vrms
Ambient operating temperature	-40 to 80°C
Weight (typical)	36.4 g

Technical document (PDF)  |  Request a quote for DRA1-MP120D3 (reply within 24 hours)