DP4RSC60E20B Crydom - Relays

DP4RSC60E20B Description

Rated at 48 V and 20 A, the Crydom DP4RSC60E20B is a solid state relay. Typical uses include temperature control of heaters, packaging and plastics machinery, and general industrial load switching.

Request a quote for the DP4RSC60E20B and our team will get back to you with price, quantity available and lead time. We ship worldwide. As with any power device, please check the manufacturer's datasheet to confirm it matches your design.

Summary of Features

Target Applications

Crydom DP4RSC60E20B is used for forward / reverse control of motors in conveyors, gates and doors, hoists, actuators and material handling equipment.

Key Specifications

Crydom DP4RSC60E20B is a 20 A DC reversing solid state contactor (DP Series, 4-channel DC reversing), 1-48 VDC load, DC control 18-32 VDC, soft start / ramp up 1 s, dynamic brake, continuous. Source: Crydom DP Series datasheet (Rev 061411). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	1-48 VDC
Resistive load rating (UL 508, IEC 60947-4-1 DC-1)	20 Adc
Motor controller rating (UL 508, IEC 60947-4-1 DC-3)	13 FLA
Maximum surge current (10 ms)	80 Adc
Maximum on-state voltage drop @ rated current	0.28 Vdc
Maximum on-state resistance per switch (RDS-on)	0.014 Ohm
Maximum off-state leakage @ rated voltage	20 µA
Minimum load current	0.10 mA
Combined thermal resistance junction to case (Rjc)	0.40 °C/W
Start / stop mode	soft start / ramp up 1 s; dynamic brake, continuous
Input
Logic supply and control voltage range	18-32 VDC
Logic supply current	20-25 mA
Typical interlocking time	200 ms
Mating connector (not supplied)	Molex 050579404 or equivalent
General
Dielectric strength, input/output/base	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	10.9 oz (310 g)

Technical document (PDF)  |  Request a quote for DP4RSC60E20B (reply within 24 hours)