DP4RSB60E20 Crydom - Relays

DP4RSB60E20 Description

DP4RSB60E20 is a 48 V, 20 A solid state relay made by Crydom. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Need the DP4RSB60E20? USComponent stocks and sources power modules for repair shops, OEMs and maintenance teams worldwide. Request a quote and we'll confirm availability and lead time. Always compare against the datasheet before ordering.

Summary of Features

Target Applications

Crydom DP4RSB60E20 is used for forward / reverse control of motors in conveyors, gates and doors, hoists, actuators and material handling equipment.

Key Specifications

Crydom DP4RSB60E20 is a 20 A DC reversing solid state contactor (DP Series, 4-channel DC reversing), 1-48 VDC load, DC control 18-32 VDC, soft start / ramp up 0.5 s, stop mode matches start mode. Source: Crydom DP Series datasheet (Rev 061411). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	1-48 VDC
Resistive load rating (UL 508, IEC 60947-4-1 DC-1)	20 Adc
Motor controller rating (UL 508, IEC 60947-4-1 DC-3)	13 FLA
Maximum surge current (10 ms)	80 Adc
Maximum on-state voltage drop @ rated current	0.28 Vdc
Maximum on-state resistance per switch (RDS-on)	0.014 Ohm
Maximum off-state leakage @ rated voltage	20 µA
Minimum load current	0.10 mA
Combined thermal resistance junction to case (Rjc)	0.40 °C/W
Start / stop mode	soft start / ramp up 0.5 s; stop mode matches start mode
Input
Logic supply and control voltage range	18-32 VDC
Logic supply current	20-25 mA
Typical interlocking time	200 ms
Mating connector (not supplied)	Molex 050579404 or equivalent
General
Dielectric strength, input/output/base	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	10.9 oz (310 g)

Technical document (PDF)  |  Request a quote for DP4RSB60E20 (reply within 24 hours)