DP4R60D20B Crydom - Relays

DP4R60D20B Description

DP4R60D20B is a 48 V, 20 A solid state relay made by Crydom. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

USComponent has been supplying power semiconductors since 2001, including discontinued and hard-to-find part numbers. Send us an RFQ for the DP4R60D20B and we will reply with price, condition and lead time. Please check the manufacturer's datasheet to confirm ratings, package and pin-out before you order.

Summary of Features

Target Applications

Crydom DP4R60D20B is used for forward / reverse control of motors in conveyors, gates and doors, hoists, actuators and material handling equipment.

Key Specifications

Crydom DP4R60D20B is a 20 A DC reversing solid state contactor (DP Series, 4-channel DC reversing), 1-48 VDC load, DC control 4.5-15 VDC, standard start, dynamic brake, continuous. Source: Crydom DP Series datasheet (Rev 061411). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	1-48 VDC
Resistive load rating (UL 508, IEC 60947-4-1 DC-1)	20 Adc
Motor controller rating (UL 508, IEC 60947-4-1 DC-3)	13 FLA
Maximum surge current (10 ms)	80 Adc
Maximum on-state voltage drop @ rated current	0.28 Vdc
Maximum on-state resistance per switch (RDS-on)	0.014 Ohm
Maximum off-state leakage @ rated voltage	20 µA
Minimum load current	0.10 mA
Combined thermal resistance junction to case (Rjc)	0.40 °C/W
Start / stop mode	standard start; dynamic brake, continuous
Input
Logic supply and control voltage range	4.5-15 VDC
Logic supply current	16-20 mA
Typical interlocking time	200 ms
Mating connector (not supplied)	Molex 050579404 or equivalent
General
Dielectric strength, input/output/base	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	10.9 oz (310 g)

Technical document (PDF)  |  Request a quote for DP4R60D20B (reply within 24 hours)