DP4RSB60D20B Crydom - Relays

DP4RSB60D20B Description

Crydom DP4RSB60D20B is a solid state relay rated at 48 V and 20 A. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent has sourced power semiconductors for maintenance teams and OEMs since 2001. For price and availability of the DP4RSB60D20B, send us a request for quote. Please confirm the specifications against the manufacturer's datasheet before purchase.

Summary of Features

Target Applications

Crydom DP4RSB60D20B is used for forward / reverse control of motors in conveyors, gates and doors, hoists, actuators and material handling equipment.

Key Specifications

Crydom DP4RSB60D20B is a 20 A DC reversing solid state contactor (DP Series, 4-channel DC reversing), 1-48 VDC load, DC control 4.5-15 VDC, soft start / ramp up 0.5 s, dynamic brake, continuous. Source: Crydom DP Series datasheet (Rev 061411). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	1-48 VDC
Resistive load rating (UL 508, IEC 60947-4-1 DC-1)	20 Adc
Motor controller rating (UL 508, IEC 60947-4-1 DC-3)	13 FLA
Maximum surge current (10 ms)	80 Adc
Maximum on-state voltage drop @ rated current	0.28 Vdc
Maximum on-state resistance per switch (RDS-on)	0.014 Ohm
Maximum off-state leakage @ rated voltage	20 µA
Minimum load current	0.10 mA
Combined thermal resistance junction to case (Rjc)	0.40 °C/W
Start / stop mode	soft start / ramp up 0.5 s; dynamic brake, continuous
Input
Logic supply and control voltage range	4.5-15 VDC
Logic supply current	16-20 mA
Typical interlocking time	200 ms
Mating connector (not supplied)	Molex 050579404 or equivalent
General
Dielectric strength, input/output/base	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	10.9 oz (310 g)

Technical document (PDF)  |  Request a quote for DP4RSB60D20B (reply within 24 hours)