DP4RSA60D60 Crydom - Relays

DP4RSA60D60 Description

Crydom makes the DP4RSA60D60, a 48 V, 60 A solid state relay. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

Looking for a replacement DP4RSA60D60? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom DP4RSA60D60 is used for forward / reverse control of motors in conveyors, gates and doors, hoists, actuators and material handling equipment.

Key Specifications

Crydom DP4RSA60D60 is a 60 A DC reversing solid state contactor (DP Series, 4-channel DC reversing), 1-48 VDC load, DC control 4.5-15 VDC, soft start / ramp up 0.2 s, stop mode matches start mode. Source: Crydom DP Series datasheet (Rev 061411). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	1-48 VDC
Resistive load rating (UL 508, IEC 60947-4-1 DC-1)	60 Adc
Motor controller rating (UL 508, IEC 60947-4-1 DC-3)	15 FLA
Maximum surge current (10 ms)	240 Adc
Maximum on-state voltage drop @ rated current	0.30 Vdc
Maximum on-state resistance per switch (RDS-on)	0.005 Ohm
Maximum off-state leakage @ rated voltage	20 µA
Minimum load current	0.10 mA
Combined thermal resistance junction to case (Rjc)	0.13 °C/W
Start / stop mode	soft start / ramp up 0.2 s; stop mode matches start mode
Input
Logic supply and control voltage range	4.5-15 VDC
Logic supply current	16-20 mA
Typical interlocking time	200 ms
Mating connector (not supplied)	Molex 050579404 or equivalent
General
Dielectric strength, input/output/base	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	12.2 oz (345 g)

Technical document (PDF)  |  Request a quote for DP4RSA60D60 (reply within 24 hours)