DC400D10 Crydom - Relays

DC400D10 Description

The DC400D10 from Crydom is a solid state relay with a 300 V / 10 A rating. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

Need the DC400D10? USComponent stocks and sources power modules for repair shops, OEMs and maintenance teams worldwide. Request a quote and we'll confirm availability and lead time. Always compare against the datasheet before ordering.

Summary of Features

Target Applications

Crydom DC400D10 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom DC400D10 is a 10 A Power Plus DC panel-mount solid state relay, MOSFET output, 1-300 VDC recommended (400 VDC max), DC control 4-32 VDC, LED status indicator. Source: Crydom Power Plus DC Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Recommended operating voltage	1-300 VDC
Absolute maximum rating	400 VDC
Maximum load current	10 Adc
Minimum load current	2.5 mA
Maximum surge current (10 ms)	32 Adc
Maximum on-state voltage drop @ rated current	1.55 Vdc
Maximum on-state resistance (RDS-on)	0.155 Ohm
Maximum off-state leakage @ rated voltage	0.4 mA
Thermal resistance junction to case (Rjc)	0.5 °C/W
Maximum PWM frequency	900 Hz
Input
Control voltage range	4-32 VDC
Minimum turn-on / must turn-off voltage	4 VDC / 1 VDC
Input current	11-14 mA
Maximum turn-on / turn-off time	75 µs / 100 µs
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-40 to 100°C
Weight (typical)	2.53 oz (72 g)

Technical document (PDF)  |  Request a quote for DC400D10 (reply within 24 hours)