DC400D10C Crydom - Relays

DC400D10C Description

Rated at 300 V and 10 A, the Crydom DC400D10C is a solid state relay. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent has sourced power semiconductors for maintenance teams and OEMs since 2001. For price and availability of the DC400D10C, send us a request for quote. Please confirm the specifications against the manufacturer's datasheet before purchase.

Summary of Features

Target Applications

Crydom DC400D10C is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom DC400D10C is a 10 A Power Plus DC panel-mount solid state relay, MOSFET output, 1-300 VDC recommended (400 VDC max), DC control 4-32 VDC, LED status indicator, with IP20 cover. Source: Crydom Power Plus DC Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Recommended operating voltage	1-300 VDC
Absolute maximum rating	400 VDC
Maximum load current	10 Adc
Minimum load current	2.5 mA
Maximum surge current (10 ms)	32 Adc
Maximum on-state voltage drop @ rated current	1.55 Vdc
Maximum on-state resistance (RDS-on)	0.155 Ohm
Maximum off-state leakage @ rated voltage	0.4 mA
Thermal resistance junction to case (Rjc)	0.5 °C/W
Maximum PWM frequency	900 Hz
Input
Control voltage range	4-32 VDC
Minimum turn-on / must turn-off voltage	4 VDC / 1 VDC
Input current	11-14 mA
Maximum turn-on / turn-off time	75 µs / 100 µs
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-40 to 100°C
Weight (typical)	2.53 oz (72 g)

Technical document (PDF)  |  Request a quote for DC400D10C (reply within 24 hours)