DC100D10 Crydom - Relays

DC100D10 Description

The Crydom DC100D10 is a solid state relay, rated for 100 V and 10 A. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Request a quote for the DC100D10 and our team will get back to you with price, quantity available and lead time. We ship worldwide. As with any power device, please check the manufacturer's datasheet to confirm it matches your design.

Summary of Features

Target Applications

Crydom DC100D10 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom DC100D10 is a 10 A Power Plus DC panel-mount solid state relay, MOSFET output, 1-72 VDC recommended (100 VDC max), DC control 4-32 VDC, LED status indicator. Source: Crydom Power Plus DC Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Recommended operating voltage	1-72 VDC
Absolute maximum rating	100 VDC
Maximum load current	10 Adc
Minimum load current	2.5 mA
Maximum surge current (10 ms)	66 Adc
Maximum on-state voltage drop @ rated current	0.13 Vdc
Maximum on-state resistance (RDS-on)	0.013 Ohm
Maximum off-state leakage @ rated voltage	0.1 mA
Thermal resistance junction to case (Rjc)	1.27 °C/W
Maximum PWM frequency	1000 Hz
Input
Control voltage range	4-32 VDC
Minimum turn-on / must turn-off voltage	4 VDC / 1 VDC
Input current	11-14 mA
Maximum turn-on / turn-off time	75 µs / 150 µs
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-40 to 100°C
Weight (typical)	2.53 oz (72 g)

Technical document (PDF)  |  Request a quote for DC100D10 (reply within 24 hours)