CXE480D5 Crydom - Relays

CXE480D5 Description

The CXE480D5 is a solid state relay made by Crydom. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

USComponent has been supplying power semiconductors since 2001, including discontinued and hard-to-find part numbers. Send us an RFQ for the CXE480D5 and we will reply with price, condition and lead time. Please check the manufacturer's datasheet to confirm ratings, package and pin-out before you order.

Summary of Features

Target Applications

Crydom CXE480D5 is used for PCB-level switching of small AC loads such as solenoids, valves, small heaters, fans and lamps in control boards, appliances, HVAC controls and industrial electronics.

Key Specifications

Crydom CXE480D5 is a 5 A SIP (single in-line) PCB-mount solid state relay, CX Series (48-660 VAC), SCR output, DC control (15-32 VDC), zero voltage turn-on. Source: Crydom CX Series datasheet (FDE-07-01 Rev. A). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	48-660 Vrms (47-63 Hz)
Maximum load current	5 Arms
Transient overvoltage	1200 Vpk
Minimum load current	0.06 Arms
Maximum surge current	250 Apk (16.6 ms)
Maximum on-state voltage drop @ rated current	1.4 Vpk
Maximum off-state leakage @ rated voltage	0.1 mArms
Minimum off-state dv/dt	500 V/µs
Maximum I²t for fusing	260 A²s (8.3 ms)
Motor rating (UL 508 / IEC 60947)	0.25 HP @ 240 VAC, 0.33 HP @ 380 VAC, 0.5 HP @ 480 VAC
Switching type	zero voltage turn-on
Input
Control voltage range	15-32 VDC
Minimum turn-on voltage	15.0 VDC
Drop-out voltage	1.0 VDC
Nominal voltage / typical input current	24 VDC / 15 mAdc
Nominal input impedance	1500 Ohm
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output	4000 Vrms
Ambient operating temperature	-10 to 80°C
Weight (typical)	0.4 oz (11 g)

Technical document (PDF)  |  Request a quote for CXE480D5 (reply within 24 hours)