CXE380D5R Crydom - Relays

CXE380D5R Description

The CXE380D5R is a solid state relay made by Crydom. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent has sourced power semiconductors for maintenance teams and OEMs since 2001. For price and availability of the CXE380D5R, send us a request for quote. Please confirm the specifications against the manufacturer's datasheet before purchase.

Summary of Features

Target Applications

Crydom CXE380D5R is used for PCB-level switching of small AC loads such as solenoids, valves, small heaters, fans and lamps in control boards, appliances, HVAC controls and industrial electronics.

Key Specifications

Crydom CXE380D5R is a 5 A SIP (single in-line) PCB-mount solid state relay, CX Series (48-530 VAC), SCR output, DC control (15-32 VDC), random turn-on. Source: Crydom CX Series datasheet (FDE-07-01 Rev. A). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	48-530 Vrms (47-63 Hz)
Maximum load current	5 Arms
Transient overvoltage	1200 Vpk
Minimum load current	0.06 Arms
Maximum surge current	250 Apk (16.6 ms)
Maximum on-state voltage drop @ rated current	1.4 Vpk
Maximum off-state leakage @ rated voltage	0.1 mArms
Minimum off-state dv/dt	500 V/µs
Maximum I²t for fusing	260 A²s (8.3 ms)
Motor rating (UL 508 / IEC 60947)	0.25 HP @ 240 VAC, 0.33 HP @ 380 VAC
Switching type	random turn-on
Input
Control voltage range	15-32 VDC
Minimum turn-on voltage	15.0 VDC
Drop-out voltage	1.0 VDC
Nominal voltage / typical input current	24 VDC / 15 mAdc
Nominal input impedance	1500 Ohm
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output	4000 Vrms
Ambient operating temperature	-10 to 80°C
Weight (typical)	0.4 oz (11 g)

Technical document (PDF)  |  Request a quote for CXE380D5R (reply within 24 hours)