CXE240D5RCrydom - RELAY

CXE240D5R Description

Crydom makes the CXE240D5R, a 240 V, 5 A solid state relay. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Need the CXE240D5R? USComponent stocks and sources power modules for repair shops, OEMs and maintenance teams worldwide. Request a quote and we'll confirm availability and lead time. Always compare against the datasheet before ordering.

Summary of Features

Target Applications

Crydom CXE240D5R is used for PCB-level switching of small AC loads such as solenoids, valves, small heaters, fans and lamps in control boards, appliances, HVAC controls and industrial electronics.

Key Specifications

Crydom CXE240D5R is a 5 A SIP (single in-line) PCB-mount solid state relay, CX Series (12-280 VAC), SCR output, DC control (15-32 VDC), random turn-on. Source: Crydom CX Series datasheet (FDE-07-01 Rev. A). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	12-280 Vrms (47-63 Hz)
Maximum load current	5 Arms
Transient overvoltage	600 Vpk
Minimum load current	0.06 Arms
Maximum surge current	250 Apk (16.6 ms)
Maximum on-state voltage drop @ rated current	1.4 Vpk
Maximum off-state leakage @ rated voltage	0.1 mArms
Minimum off-state dv/dt	500 V/µs
Maximum I²t for fusing	260 A²s (8.3 ms)
Motor rating (UL 508 / IEC 60947)	0.25 HP @ 240 VAC
Switching type	random turn-on
Input
Control voltage range	15-32 VDC
Minimum turn-on voltage	15.0 VDC
Drop-out voltage	1.0 VDC
Nominal voltage / typical input current	24 VDC / 15 mAdc
Nominal input impedance	1500 Ohm
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output	4000 Vrms
Ambient operating temperature	-10 to 80°C
Weight (typical)	0.4 oz (11 g)

Technical document (PDF)  |  Request a quote for CXE240D5R (reply within 24 hours)