CMXE60D5 Crydom - Relays

CMXE60D5 Description

Crydom CMXE60D5 is a solid state relay rated at 60 V and 5 A. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

USComponent has been supplying power semiconductors since 2001, including discontinued and hard-to-find part numbers. Send us an RFQ for the CMXE60D5 and we will reply with price, condition and lead time. Please check the manufacturer's datasheet to confirm ratings, package and pin-out before you order.

Summary of Features

Target Applications

Crydom CMXE60D5 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom CMXE60D5 is a 5 A SIP PCB-mount DC solid state relay (CMX Series), MOSFET output, 0-60 VDC load, DC control 20-28 VDC. Source: Crydom CMX Series datasheet (Rev. 120911). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	0-60 VDC
Maximum load current	5 A
Maximum on-state resistance (RDS-on @ rated current)	0.10 Ohm
Maximum surge current (10 ms)	60 Apk
Maximum on-state voltage drop @ rated current	0.5 VDC
Maximum off-state leakage @ rated voltage	100 µA
Input
Control voltage range	20-28 VDC
Must turn-on / turn-off voltage	20 VDC / 1.0 VDC
Typical input current	12 mAdc @ 24 VDC
Nominal input impedance	780 Ohm
Maximum turn-on / turn-off time	1.0 ms / 300 µs
General
Dielectric strength, input/output	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	0.4 oz (11 g)

Technical document (PDF)  |  Request a quote for CMXE60D5 (reply within 24 hours)