CMXE100D10 Crydom - Relays

CMXE100D10 Description

Crydom CMXE100D10 is a solid state relay rated at 100 V and 10 A. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent (Young & New Century LLC) supplies power modules, thyristors, diodes and other industrial components, including legacy parts. Contact us for a quote on the CMXE100D10, and please confirm ratings against the datasheet before ordering.

Summary of Features

Target Applications

Crydom CMXE100D10 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom CMXE100D10 is a 10 A SIP PCB-mount DC solid state relay (CMX Series), MOSFET output, 0-100 VDC load, DC control 20-28 VDC. Source: Crydom CMX Series datasheet (Rev. 120911). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	0-100 VDC
Maximum load current	10 A
Maximum on-state resistance (RDS-on @ rated current)	0.010 Ohm
Maximum surge current (10 ms)	100 Apk
Maximum on-state voltage drop @ rated current	0.1 VDC
Maximum off-state leakage @ rated voltage	100 µA
Input
Control voltage range	20-28 VDC
Must turn-on / turn-off voltage	20 VDC / 1.0 VDC
Typical input current	12 mAdc @ 24 VDC
Nominal input impedance	780 Ohm
Maximum turn-on / turn-off time	1.0 ms / 300 µs
General
Dielectric strength, input/output	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	0.4 oz (11 g)

Technical document (PDF)  |  Request a quote for CMXE100D10 (reply within 24 hours)