CMX100D10 Crydom - Relays

CMX100D10 Description

Rated at 100 V and 10 A, the Crydom CMX100D10 is a solid state relay. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Looking for a replacement CMX100D10? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom CMX100D10 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom CMX100D10 is a 10 A SIP PCB-mount DC solid state relay (CMX Series), MOSFET output, 0-100 VDC load, DC control 3.0-10.0 VDC. Source: Crydom CMX Series datasheet (Rev. 120911). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	0-100 VDC
Maximum load current	10 A
Maximum on-state resistance (RDS-on @ rated current)	0.010 Ohm
Maximum surge current (10 ms)	100 Apk
Maximum on-state voltage drop @ rated current	0.1 VDC
Maximum off-state leakage @ rated voltage	100 µA
Input
Control voltage range	3.0-10.0 VDC
Must turn-on / turn-off voltage	3.0 VDC / 1.0 VDC
Typical input current	15 mAdc @ 5 VDC
Nominal input impedance	300 Ohm
Maximum turn-on / turn-off time	1.0 ms / 300 µs
General
Dielectric strength, input/output	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	0.4 oz (11 g)

Technical document (PDF)  |  Request a quote for CMX100D10 (reply within 24 hours)