6MBP20RH-060 Fuji Electric - Intelligent Power Module
Also written as: 6MBP20RH060
Discontinued: Fuji Electric recommended replacement: 6MBP20VAA060-50. We supply both the original 6MBP20RH-060 and the replacement - check the datasheets before switching.
6MBP20RH-060 Description
Fuji Electric 6MBP20RH-060 is an intelligent power module (IPM) rated at 600 V and 20 A. It is mostly used in small and mid-size AC drives and servo amplifiers, where built-in gate drive and protection save board space.
USComponent has been supplying power semiconductors since 2001, including discontinued and hard-to-find part numbers. Send us an RFQ for the 6MBP20RH-060 and we will reply with price, condition and lead time. Please check the manufacturer's datasheet to confirm ratings, package and pin-out before you order.
Summary of Features
6MBP20RH-060 is a 600 V, 20 A IGBT intelligent power module (IGBT-IPM R series, 6 in one package) from Fuji Electric.
- Low power loss and soft switching
- High performance and high reliability IGBT with overheating protection
- Higher reliability because of a big decrease in number of parts in built-in control circuit
Target Applications
Fuji Electric 6MBP20RH-060 is used for Inverter for motor drive, AC and DC servo drive amplifier, UPS (uninterruptible power supply).
Key Specifications
6MBP20RH-060 is a 600 V, 20 A IGBT intelligent power module (IGBT-IPM R series, 6 in one package) from Fuji Electric. Source: Fuji Electric datasheet 6MBP20RH060 (IGBT-IPM R series).
| Parameter | Value |
|---|---|
| Manufacturer | Fuji Electric |
| Product type | IGBT-IPM (intelligent power module), R series |
| Configuration | 6 in one package (3-phase inverter) with built-in pre-drivers and protection |
| DC bus voltage VDC | 450 V (surge 500 V; short operating 400 V); recommended 200 - 400 V |
| Collector-emitter voltage VCES | 600 V |
| Collector current | IC 20 A DC; ICP 40 A (1 ms); -IC 20 A |
| Collector power dissipation PC | 63 W (one transistor) |
| VCE(sat) | 2.7 V max (IC = 20 A) |
| FWD forward voltage VF | 3.5 V max (-IC = 20 A) |
| Switching | ton 0.5 µs min, toff 3.5 µs max, trr 0.5 µs max (IC = 20 A, VDC = 300 V) |
| Pre-driver supply VCC | 15 V (13.5 - 16.5 V recommended) |
| Input threshold Vin(th) | Turn-on 1.35 V typ, turn-off 1.60 V typ |
| Protection | Over-current IOC 37 A typ (N-side), under-voltage VUV 11.0 - 12.5 V, IGBT chip overheat TjOH 150 °C min, alarm output |
| Switching frequency | 1 - 20 kHz (recommended) |
| Thermal resistance Rth(j-c) max | 2.0 °C/W IGBT; 3.6 °C/W FWD |
| Junction temperature Tj | 150 °C |
| Operating case temperature | -20 to +100 °C |
| Storage temperature | -40 to +125 °C |
| Isolating voltage Viso | AC 2500 V (1 min) |
| Screw torque | Mounting M4: 2.0 N·m max (recommended 1.3 - 1.7) |
| Datasheet | Available on this page (PDF) |
Technical document (PDF) | Request a quote for 6MBP20RH-060 (reply within 24 hours)
Related Part Numbers
| 6MBP15RH060 600V, 15A | 6MBP30RH-060 600V, 30A | 6MBP50RH-060 600V, 50A | 6MBP75RH060 600V, 75A |
| 6MBP100RH-060 600V, 100A | 6MBP20RTA060 600V, 20A | 6MBP20RB120 1200V, 20A | 6MBP20RTA060-01 600V, 20A |
| 6MBP20JE060 600V, 20A | 6MBP20RY060 600V, 20A | 6MBP20JB060-03 600V 20A, 14 pieces ready to ship in US | 6MBP20VAA060-50 600V, 20A |
| 6MBP20JB060 600V, 20A | 6MBP20XRHA065-50 650V, 20A | 6MBP200XEN120-50 1200V, 200A | 6MBP20XRVF065-50 650V, 20A |

