LC241 Crydom - Relays

LC241 Description

Rated at 240 V and 1.5 A, the Crydom LC241 is a solid state relay. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent has been supplying power semiconductors since 2001, including discontinued and hard-to-find part numbers. Send us an RFQ for the LC241 and we will reply with price, condition and lead time. Please check the manufacturer's datasheet to confirm ratings, package and pin-out before you order.

Summary of Features

Target Applications

Crydom LC241 is used for PCB-level switching of small AC loads such as solenoids, valves, small heaters, fans and lamps in control boards, appliances, HVAC controls and industrial electronics.

Key Specifications

Crydom LC241 is a 1.5 A mini-SIP PCB-mount solid state relay (LC Series), dual SCR output 12-280 VAC, normally open, DC control 4-10 VDC, zero voltage turn-on. The datasheet marks this series obsolete. Source: Crydom LC Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage (47-63 Hz)	12-280 Vrms
Maximum load current	1.5 Arms
Minimum load current	0.025 Arms
Transient overvoltage	600 Vpk
Maximum surge current (16.6 ms)	80 Apk
Maximum on-state voltage drop @ rated current	1.6 Vpk
Maximum off-state leakage @ rated voltage	0.1 mArms
Minimum off-state dv/dt	500 V/µs
Input
Control voltage range	4-10 VDC
Must turn-on / turn-off voltage	4.0 / 1.0 VDC
Typical input current @ 5 VDC	15 mA
Nominal input impedance	300 Ohm
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output/base	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	0.6 oz (17 g)

Technical document (PDF)  |  Request a quote for LC241 (reply within 24 hours)