HS053-D53TP50D Crydom - Relays

HS053-D53TP50D Description

Crydom HS053-D53TP50D is a solid state relay rated at 530 V and 82.5 A. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

Looking for a replacement HS053-D53TP50D? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom HS053-D53TP50D is used for ready-to-install switching of AC loads such as heaters and furnaces in control cabinets, with the SSR pre-mounted on a matched heat sink.

Key Specifications

Crydom HS053-D53TP50D is an SSR and heat sink assembly (HS053 Series) with Crydom D53TP50D (3-phase), 82.5 A AC output @ 40°C, 48-530 VAC, DC control 3-32 VDC. Source: Crydom HS053 Series Assemblies datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage (47-63 Hz)	48-530 Vrms
Maximum load current @ 40°C	82.5 Arms
Minimum load current	0.05 Arms
Transient overvoltage	1200 Vpk
Maximum off-state leakage @ rated voltage	10 mArms
Minimum off-state dv/dt	500 V/µs
Maximum surge current (16.6 ms)	250 Apk
Maximum on-state voltage drop @ rated current	1.6 V
Maximum I²t for fusing (8.3 ms)	260 A²s
Input
Control voltage range	3-32 VDC
Input current	10 mA @ 5 VDC
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output/base	4000 Vrms
Ambient operating temperature	-40 to 80°C
Weight (typical)	3.78 lb (1739 g)

Technical document (PDF)  |  Request a quote for HS053-D53TP50D (reply within 24 hours)