F1892CCH1600 Crydom - Power Transistor Module

F1892CCH1600 Description

The F1892CCH1600 from Crydom is an SCR/diode power module with a 1600 V / 90 A rating. It is used as a building block for AC switches, soft starters, controlled rectifiers and heater controls.

USComponent has been supplying power semiconductors since 2001, including discontinued and hard-to-find part numbers. Send us an RFQ for the F1892CCH1600 and we will reply with price, condition and lead time. Please check the manufacturer's datasheet to confirm ratings, package and pin-out before you order.

Summary of Features

Target Applications

Crydom F1892CCH1600 is used for AC/DC power conversion and control: controlled rectifiers, DC motor drives, heater and power control, battery chargers and power supplies.

Key Specifications

Crydom F1892CCH1600 is an F18 Series power module (SCR/diode power control building block), circuit type CCH, 90 A DC output current, for 600 VAC lines. Source: Crydom F18 Series datasheet. Values at 25°C unless noted.

Parameter	Value
Maximum DC output current (Tc = 85°C)	90 A
Operating voltage code	1600 (600 VAC line)
Repetitive peak reverse voltage (VRRM)	1600 Vpk
Circuit type	CCH (see datasheet circuit diagram)
Maximum voltage drop (VF)	1.40 V @ 270 A
Maximum non-repetitive surge current (1/2 cycle, 60 Hz)	1950 A
Maximum I²t for fusing (8.3 ms)	15800 A²s
Critical rate of rise of on-state current (Tj = 125°C)	100 A/µs
Critical rate of rise of off-state voltage	1000 V/µs
Gate trigger current / voltage (25°C)	150 mA / 3.0 V
Average gate power	0.5 W
Maximum peak reverse gate voltage	5.0 V
Maximum thermal resistance, junction to ceramic base per chip	0.14 °C/W
Operating junction temperature	-40 to 125°C
Isolation voltage	2500 Vrms
Weight (typical)	4.75 oz (135 g)
Torque	Terminal stud screw 30 in-lb; mounting screws 20 in-lb

Technical document (PDF)  |  Request a quote for F1892CCH1600 (reply within 24 hours)