F1892DH600 Crydom - Power Transistor Module

F1892DH600 Description

Crydom F1892DH600 is an SCR/diode power module rated at 600 V and 90 A. Typical applications include heater control, motor soft start and controlled rectification in industrial equipment.

USComponent (Young & New Century LLC) supplies power modules, thyristors, diodes and other industrial components, including legacy parts. Contact us for a quote on the F1892DH600, and please confirm ratings against the datasheet before ordering.

Summary of Features

Target Applications

Crydom F1892DH600 is used for AC/DC power conversion and control: controlled rectifiers, DC motor drives, heater and power control, battery chargers and power supplies.

Key Specifications

Crydom F1892DH600 is an F18 Series power module (SCR/diode power control building block), circuit type DH, 90 A DC output current, for 240 VAC lines. Source: Crydom F18 Series datasheet. Values at 25°C unless noted.

Parameter	Value
Maximum DC output current (Tc = 85°C)	90 A
Operating voltage code	600 (240 VAC line)
Repetitive peak reverse voltage (VRRM)	600 Vpk
Circuit type	DH (see datasheet circuit diagram)
Maximum voltage drop (VF)	1.40 V @ 270 A
Maximum non-repetitive surge current (1/2 cycle, 60 Hz)	1950 A
Maximum I²t for fusing (8.3 ms)	15800 A²s
Critical rate of rise of on-state current (Tj = 125°C)	100 A/µs
Critical rate of rise of off-state voltage	1000 V/µs
Gate trigger current / voltage (25°C)	150 mA / 3.0 V
Average gate power	0.5 W
Maximum peak reverse gate voltage	5.0 V
Maximum thermal resistance, junction to ceramic base per chip	0.14 °C/W
Operating junction temperature	-40 to 125°C
Isolation voltage	2500 Vrms
Weight (typical)	4.75 oz (135 g)
Torque	Terminal stud screw 30 in-lb; mounting screws 20 in-lb

Technical document (PDF)  |  Request a quote for F1892DH600 (reply within 24 hours)