DRTC24D06 Crydom - Relays

DRTC24D06 Description

Crydom DRTC24D06 is a solid state relay rated at 280 V and 6 A. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Looking for a replacement DRTC24D06? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom DRTC24D06 is used for time-delayed switching of heaters, motors, lamps and other loads in industrial control, HVAC and process equipment.

Key Specifications

Crydom DRTC24D06 is a 6 A SeriesOne DR solid state timer relay (11 mm wide DIN rail), timing function C, delay on break, AC output 24-280 VAC, control 12-24 VAC/DC, zero voltage turn-on. Source: Crydom SeriesOne DR Timer datasheet (Rev. 100312). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	24-280 VAC (47-440 Hz)
Rated load current	6 Arms
Rated load current (UL 508 motor controller)	3.6 Arms
Transient overvoltage	600 Vpk
Minimum load current	150 mArms
Maximum off-state leakage	0.1 mArms
Minimum off-state dv/dt	500 V/µs
Maximum surge current (1 cycle)	285/300 Apk (50/60 Hz)
Maximum I²t for fusing	410/375 A²s (50/60 Hz)
Maximum on-state voltage drop	1.3 Vpk
HP rating (UL 508 / IEC 60947) @ 240 VAC	1/3 HP (0.24 kW)
Input
Control voltage range	12-24 VAC/DC
Timing function	C, delay on break
LED status indicator	Green
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	1.76 oz (50 g)

Technical document (PDF)  |  Request a quote for DRTC24D06 (reply within 24 hours)