DRTA24A06 Crydom - Relays

DRTA24A06 Description

Crydom makes the DRTA24A06, a 280 V, 6 A solid state relay. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent has been supplying power semiconductors since 2001, including discontinued and hard-to-find part numbers. Send us an RFQ for the DRTA24A06 and we will reply with price, condition and lead time. Please check the manufacturer's datasheet to confirm ratings, package and pin-out before you order.

Summary of Features

Target Applications

Crydom DRTA24A06 is used for time-delayed switching of heaters, motors, lamps and other loads in industrial control, HVAC and process equipment.

Key Specifications

Crydom DRTA24A06 is a 6 A SeriesOne DR solid state timer relay (11 mm wide DIN rail), timing function A/At, delay on make, AC output 24-280 VAC, control 180-280 VAC/DC, zero voltage turn-on. Source: Crydom SeriesOne DR Timer datasheet (Rev. 100312). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	24-280 VAC (47-440 Hz)
Rated load current	6 Arms
Rated load current (UL 508 motor controller)	3.6 Arms
Transient overvoltage	600 Vpk
Minimum load current	150 mArms
Maximum off-state leakage	0.1 mArms
Minimum off-state dv/dt	500 V/µs
Maximum surge current (1 cycle)	285/300 Apk (50/60 Hz)
Maximum I²t for fusing	410/375 A²s (50/60 Hz)
Maximum on-state voltage drop	1.3 Vpk
HP rating (UL 508 / IEC 60947) @ 240 VAC	1/3 HP (0.24 kW)
Input
Control voltage range	180-280 VAC/DC
Timing function	A/At, delay on make
LED status indicator	Green
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	1.76 oz (50 g)

Technical document (PDF)  |  Request a quote for DRTA24A06 (reply within 24 hours)