DC60D40 Crydom - Solid State Relay

DC60D40 Description

The DC60D40 from Crydom is a solid state relay with a 60 V / 40 A rating. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Need the DC60D40? USComponent stocks and sources power modules for repair shops, OEMs and maintenance teams worldwide. Request a quote and we'll confirm availability and lead time. Always compare against the datasheet before ordering.

Summary of Features

Target Applications

Crydom DC60D40 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom DC60D40 is a 40 A Power Plus DC panel-mount solid state relay, MOSFET output, 1-48 VDC recommended (60 VDC max), DC control 4-32 VDC, LED status indicator. Source: Crydom Power Plus DC Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Recommended operating voltage	1-48 VDC
Absolute maximum rating	60 VDC
Maximum load current	40 Adc
Minimum load current	2.5 mA
Maximum surge current (10 ms)	163 Adc
Maximum on-state voltage drop @ rated current	0.36 Vdc
Maximum on-state resistance (RDS-on)	0.009 Ohm
Maximum off-state leakage @ rated voltage	0.1 mA
Thermal resistance junction to case (Rjc)	0.74 °C/W
Maximum PWM frequency	900 Hz
Input
Control voltage range	4-32 VDC
Minimum turn-on / must turn-off voltage	4 VDC / 1 VDC
Input current	11-14 mA
Maximum turn-on / turn-off time	75 µs / 150 µs
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-40 to 100°C
Weight (typical)	2.53 oz (72 g)

Technical document (PDF)  |  Request a quote for DC60D40 (reply within 24 hours)