DC60D100C Crydom - Relays

DC60D100C Description

The DC60D100C from Crydom is a solid state relay with a 60 V / 100 A rating. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Looking for a replacement DC60D100C? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom DC60D100C is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom DC60D100C is a 100 A Power Plus DC panel-mount solid state relay, MOSFET output, 1-48 VDC recommended (60 VDC max), DC control 4-32 VDC, LED status indicator, with IP20 cover. Source: Crydom Power Plus DC Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Recommended operating voltage	1-48 VDC
Absolute maximum rating	60 VDC
Maximum load current	100 Adc
Minimum load current	2.5 mA
Maximum surge current (10 ms)	326 Adc
Maximum on-state voltage drop @ rated current	0.56 Vdc
Maximum on-state resistance (RDS-on)	0.0056 Ohm
Maximum off-state leakage @ rated voltage	0.1 mA
Thermal resistance junction to case (Rjc)	0.51 °C/W
Maximum PWM frequency	700 Hz
Input
Control voltage range	4-32 VDC
Minimum turn-on / must turn-off voltage	4 VDC / 1 VDC
Input current	11-14 mA
Maximum turn-on / turn-off time	75 µs / 150 µs
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-40 to 100°C
Weight (typical)	2.53 oz (72 g)

Technical document (PDF)  |  Request a quote for DC60D100C (reply within 24 hours)