D2D07L Crydom - Relays

D2D07L Description

Crydom D2D07L is a solid state relay rated at 200 V and 7 A. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Looking for a replacement D2D07L? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom D2D07L is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom D2D07L is a 7 A DC output panel-mount solid state relay (1-DCL Series), MOSFET output, 1-200 VDC class, DC control 3.5-32 VDC. Source: Crydom 1-DCL Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Recommended operating voltage	1-150 VDC
Absolute maximum rating	200 VDC
Maximum load current	7 Adc
Minimum load current	1 mA
Maximum surge current (10 ms)	22 Adc
Maximum on-state voltage drop @ rated current	1.5 Vdc
Maximum on-state resistance (RDS-on)	0.21 Ohm
Maximum off-state leakage @ rated voltage	0.1 mA
Thermal resistance junction to case (Rjc)	1.24 °C/W
Maximum PWM frequency	3500 Hz
Input
Control voltage range	3.5-32 VDC
Minimum turn-on / must turn-off voltage	3.5 VDC / 1 VDC
Input current	10-15 mA
Maximum turn-on / turn-off time	100 µs / 100 µs
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-40 to 100°C
Weight (typical)	2.66 oz (75.5 g)

Technical document (PDF)  |  Request a quote for D2D07L (reply within 24 hours)