D1D40L Crydom - Relays

D1D40L Description

Crydom D1D40L is a solid state relay rated at 100 V and 40 A. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent is a BBB A+ accredited distributor that specializes in power modules and industrial components, new and legacy. Ask us for a quote on the D1D40L; we ship worldwide. Please verify the ratings and package against the manufacturer's datasheet first.

Summary of Features

Target Applications

Crydom D1D40L is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom D1D40L is a 40 A DC output panel-mount solid state relay (1-DCL Series), MOSFET output, 1-100 VDC class, DC control 3.5-32 VDC. Source: Crydom 1-DCL Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Recommended operating voltage	1-72 VDC
Absolute maximum rating	100 VDC
Maximum load current	40 Adc
Minimum load current	1 mA
Maximum surge current (10 ms)	106 Adc
Maximum on-state voltage drop @ rated current	1 Vdc
Maximum on-state resistance (RDS-on)	0.025 Ohm
Maximum off-state leakage @ rated voltage	0.3 mA
Thermal resistance junction to case (Rjc)	0.68 °C/W
Maximum PWM frequency	2500 Hz
Input
Control voltage range	3.5-32 VDC
Minimum turn-on / must turn-off voltage	3.5 VDC / 1 VDC
Input current	10-15 mA
Maximum turn-on / turn-off time	100 µs / 100 µs
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-40 to 100°C
Weight (typical)	2.66 oz (75.5 g)

Technical document (PDF)  |  Request a quote for D1D40L (reply within 24 hours)