D2440D-10 Crydom - Relays

D2440D-10 Description

Crydom D2440D-10 is a solid state relay rated at 240 V and 40 A. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

Looking for a replacement D2440D-10? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom D2440D-10 is used for switching AC loads in industrial heating and temperature control (ovens, furnaces, plastic molding and extrusion machines), packaging and food processing equipment, lighting control, HVAC systems and industrial automation.

Key Specifications

Crydom D2440D-10 is a dual-output panel-mount solid state relay (DUAL Series, two independently controlled channels), 40 A per channel @ 24-280 VAC, SCR output, DC control 4-15 VDC, random turn-on. Source: Crydom DUAL Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output (per channel)
Operating voltage (47-63 Hz)	24-280 Vrms
Maximum load current	40 Arms
Minimum load current	0.15 Arms
Transient overvoltage	600 Vpk
Maximum off-state leakage @ rated voltage	10 mArms
Minimum off-state dv/dt	500 V/µs
Maximum 1 cycle surge current (50/60 Hz)	597/625 Apk
Maximum on-state voltage drop @ rated current	1.6 Vpk
Thermal resistance junction to case (Rjc)	0.63 °C/W
Maximum I²t for fusing (1/2 cycle, 50/60 Hz)	1779/1621 A²s
Switching type	random turn-on
Input
Control voltage range	4-15 VDC
Minimum turn-on / turn-off voltage	4.0 VDC / 1.0 VDC
Typical input current	13 mA @ 5 VDC
Nominal input impedance	300 Ohm
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output	4000 Vrms
Ambient operating temperature	-40 to 80°C
Weight (typical)	3.0 oz (86.5 g)

Technical document (PDF)  |  Request a quote for D2440D-10 (reply within 24 hours)