D06D100 Crydom - Relays

D06D100 Description

The D06D100 from Crydom is a solid state relay with a 60 V / 100 A rating. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent (Young & New Century LLC) supplies power modules, thyristors, diodes and other industrial components, including legacy parts. Contact us for a quote on the D06D100, and please confirm ratings against the datasheet before ordering.

Summary of Features

Target Applications

Crydom D06D100 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom D06D100 is a 100 A DC output panel-mount solid state relay (D06D Series), MOSFET output 1-48 VDC (60 VDC max), DC control 3.5-32 VDC. Source: Crydom D06D Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Recommended operating voltage	1-48 VDC
Absolute maximum rating	60 VDC
Maximum load current	100 Adc
Minimum load current	5 mA
Maximum surge current (10 ms)	270 Adc
Maximum on-state voltage drop @ rated current	0.5 Vdc
Maximum on-state resistance (RDS-on)	0.005 Ohm
Maximum off-state leakage @ rated voltage	0.3 mA
Thermal resistance junction to case (Rjc)	0.51 °C/W
Maximum PWM frequency	700 Hz
Input
Control voltage range	3.5-32 VDC
Minimum turn-on / must turn-off voltage	3.5 VDC / 1 VDC
Input current	10-15 mA
Maximum turn-on time	100 µs
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-40 to 100°C
Weight (typical)	2.66 oz (75.5 g)

Technical document (PDF)  |  Request a quote for D06D100 (reply within 24 hours)