CTA06-600TW Crydom - TRIAC

CTA06-600TW Description

Crydom CTA06-600TW is a solid state relay. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Need the CTA06-600TW? USComponent stocks and sources power modules for repair shops, OEMs and maintenance teams worldwide. Request a quote and we'll confirm availability and lead time. Always compare against the datasheet before ordering.

Summary of Features

Target Applications

Crydom CTA06-600TW is used for AC switching and phase control in heaters, lighting dimmers, motor speed control, appliances and solid state relays.

Key Specifications

Crydom CTA06-600TW is a 6 A, 600 V TRIAC in a TO-220AB isolated package, logic level (3 quadrants) type. Source: Crydom CTA/CTB06 TRIAC datasheet. Values at 25°C unless noted.

Parameter	Value
RMS on-state current (full sine wave)	6 A (Tc = 105°C)
Repetitive peak off-state voltage (VDRM/VRRM)	600 V
Type	Logic level (3 quadrants)
Gate trigger current IGT (max, VD = 12 V)	5 mA
Gate trigger voltage VGT (max)	1.3 V
Holding current IH (max)	10 mA
Critical rate of rise of off-state voltage dv/dt (min, Tj = 125°C)	20 V/µs
Non-repetitive surge peak on-state current	60 A (50 Hz) / 63 A (60 Hz)
I²t for fusing (10 ms)	21 A²s
Critical rate of rise of on-state current (Tj = 125°C)	100 A/µs
On-state voltage VT (max, ITM = 5.5 A)	1.55 V
Thermal resistance junction to case	2.7 °C/W
Isolation voltage	2500 Vrms
Operating junction temperature	-40 to 125°C
Package	TO-220AB isolated

Technical document (PDF)  |  Request a quote for CTA06-600TW (reply within 24 hours)