CTA06-600C Crydom - TRIAC

CTA06-600C Description

The CTA06-600C is a solid state relay made by Crydom. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

We help engineers and repair technicians find parts like the CTA06-600C, including obsolete ones. Send a quick RFQ for current pricing and delivery. Before ordering, please confirm ratings and pin-out with the official datasheet.

Summary of Features

Target Applications

Crydom CTA06-600C is used for AC switching and phase control in heaters, lighting dimmers, motor speed control, appliances and solid state relays.

Key Specifications

Crydom CTA06-600C is a 6 A, 600 V TRIAC in a TO-220AB isolated package, standard (4 quadrants) type. Source: Crydom CTA/CTB06 TRIAC datasheet. Values at 25°C unless noted.

Parameter	Value
RMS on-state current (full sine wave)	6 A (Tc = 105°C)
Repetitive peak off-state voltage (VDRM/VRRM)	600 V
Type	Standard (4 quadrants)
Gate trigger current IGT (max, VD = 12 V)	25 mA (QI-III), 50 mA (QIV)
Gate trigger voltage VGT (max)	1.3 V
Holding current IH (max)	25 mA
Critical rate of rise of off-state voltage dv/dt (min, Tj = 125°C)	200 V/µs
Non-repetitive surge peak on-state current	60 A (50 Hz) / 63 A (60 Hz)
I²t for fusing (10 ms)	21 A²s
Critical rate of rise of on-state current (Tj = 125°C)	100 A/µs
On-state voltage VT (max, ITM = 5.5 A)	1.55 V
Thermal resistance junction to case	2.7 °C/W
Isolation voltage	2500 Vrms
Operating junction temperature	-40 to 125°C
Package	TO-220AB isolated

Technical document (PDF)  |  Request a quote for CTA06-600C (reply within 24 hours)