CSE2450 Crydom - Relays

CSE2450 Description

Crydom CSE2450 is a solid state relay rated at 240 V and 50 A. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Request a quote for the CSE2450 and our team will get back to you with price, quantity available and lead time. We ship worldwide. As with any power device, please check the manufacturer's datasheet to confirm it matches your design.

Summary of Features

Target Applications

Crydom CSE2450 is used for switching AC loads in industrial heating and temperature control (ovens, furnaces, plastic molding and extrusion machines), packaging and food processing equipment, lighting control, HVAC systems and industrial automation.

Key Specifications

Crydom CSE2450 is a 50 A panel-mount solid state relay (CSE Series, 24-280 VAC, snubberless / low leakage), SCR output, DC control 15-32 VDC, zero voltage turn-on. The datasheet marks this series obsolete (replaced by CSW). Source: Crydom CSE Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage (47-440 Hz)	24-280 Vrms
Maximum load current	50 Arms
Transient overvoltage	600 Vpk
Minimum load current	0.15 Arms
Maximum 1 cycle surge current (50/60 Hz)	597/625 Apk
Maximum on-state voltage drop @ rated current	1.6 Vpk
Maximum off-state leakage @ rated voltage	1.0 mArms
Minimum off-state dv/dt	500 V/µs
Thermal resistance junction to case (Rjc)	0.63 °C/W
Maximum I²t for fusing (1/2 cycle, 50/60 Hz)	1779/1621 A²s
Switching type	zero voltage turn-on
Input
Control voltage range	15-32 VDC
Minimum turn-on / turn-off voltage	15.0 / 1.0 VDC
Typical input current	7 mA @ 15 V
Nominal input impedance	2 kOhm
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output/base	4000 Vrms
Ambient operating temperature	-40 to 80°C
Weight (typical)	3.0 oz (86.5 g)

Technical document (PDF)  |  Request a quote for CSE2450 (reply within 24 hours)