CMA24125 Crydom - Relays

CMA24125 Description

The Crydom CMA24125 is a solid state relay, rated for 240 V and 125 A. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent (Young & New Century LLC) supplies power modules, thyristors, diodes and other industrial components, including legacy parts. Contact us for a quote on the CMA24125, and please confirm ratings against the datasheet before ordering.

Summary of Features

Target Applications

Crydom CMA24125 is used for switching AC loads in industrial heating and temperature control (ovens, furnaces, plastic molding and extrusion machines), packaging and food processing equipment, lighting control, HVAC systems and industrial automation.

Key Specifications

Crydom CMA24125 is a 125 A panel-mount solid state relay, CMD/CMA24 Series (24-280 VAC), SCR output, AC control (90-140 Vrms), zero-cross turn-on, LED input indicator, IP20 touch-safe housing with box-clamp terminals. Source: Crydom CMD/CMA24 Series datasheet (Rev. 113011). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage (47-63 Hz)	24-280 Vrms
Maximum load current	125 Arms
Transient overvoltage	600 Vpk
Maximum 1 cycle surge current (50/60 Hz)	1670/1750 Apk
Maximum on-state voltage drop @ rated current	1.6 Vpk
Maximum off-state leakage @ rated voltage	10 mArms
Minimum off-state dv/dt	500 V/µs
Thermal resistance junction to case (Rjc)	0.22 °C/W
Maximum I²t for fusing (1/2 cycle, 50/60 Hz)	13950/12709 A²s
Switching type	zero-cross turn-on
Input
Control voltage range	90-140 Vrms
Minimum turn-on / turn-off voltage	90 Vrms / 10 Vrms
Typical input current	15 mA @ 120 Vrms
Maximum turn-on / turn-off time	10 ms / 40 ms
General
Dielectric strength, input/output/base	4000 Vrms
Ambient operating temperature	-40 to 80°C
Weight (typical)	3.0 oz (86.5 g)

Technical document (PDF)  |  Request a quote for CMA24125 (reply within 24 hours)