20LPCV2415 Crydom - Relays

20LPCV2415 Description

The 20LPCV2415 is a solid state relay made by Crydom. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Request a quote for the 20LPCV2415 and our team will get back to you with price, quantity available and lead time. We ship worldwide. As with any power device, please check the manufacturer's datasheet to confirm it matches your design.

Summary of Features

Target Applications

Crydom 20LPCV2415 is used for proportional power control of resistive heaters in ovens, furnaces, plastic processing and other process heating applications.

Key Specifications

Crydom 20LPCV2415 is a 15 A linear proportional controller (LPCV Series, 240 VAC), SCR output, 4-20 mA analog control input, for resistive loads only. Source: Crydom LPCV Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage (60 Hz)	20-300 Vrms
Maximum load current	15 Arms
Minimum load current	0.10 Arms
Transient overvoltage	600 Vpk
Maximum surge current (16.6 ms)	150 Apk
Maximum on-state voltage drop @ rated current	1.6 Vpk
Maximum off-state leakage @ rated voltage	10 mArms
Minimum off-state dv/dt	200 V/µs
Thermal resistance junction to case (Rjc)	1.48 °C/W
Maximum I²t for fusing (8.3 ms)	94 A²s
Input
Control range	4-20 mA
Control range limits (min / max)	-0.5 / 25 mA
Turn-on threshold	4.5 mA
Nominal input impedance	460 Ohm
Sync voltage (terminals 6 and 7)	16-24 VAC (from PS120 / PS240 power supply)
General
Dielectric strength, signal to load / signal to base	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	6.0 oz (175 g)

Technical document (PDF)  |  Request a quote for 20LPCV2415 (reply within 24 hours)