L514F Crydom - Power Transistor Module

L514F Description

The L514F from Crydom is a solid state relay with a 480 V / 25 A rating. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

We help engineers and repair technicians find parts like the L514F, including obsolete ones. Send a quick RFQ for current pricing and delivery. Before ordering, please confirm ratings and pin-out with the official datasheet.

Summary of Features

Target Applications

Crydom L514F is used for AC/DC power conversion and control: controlled rectifiers, DC motor drives, heater and power control, battery chargers and power supplies.

Key Specifications

Crydom L514F is an L Series low-profile PCB-mount SCR/diode power module, 25 A, circuit type 1, 480 VAC line, with free wheeling diode. Source: Crydom L Series datasheet (Rev 121411). Values at 25°C unless noted.

Parameter	Value
Maximum DC output current (Tc = 85°C)	25 A
AC line input voltage	480 Vrms (1200 VRRM)
Circuit type	1 (see datasheet schematic)
Maximum voltage drop (VF)	1.65 V @ 25 A
Maximum non-repetitive surge current (1/2 cycle, 60 Hz)	300 A
Maximum I²t for fusing (8.3 ms)	375 A²s
Critical rate of rise of on-state current (Tj = 125°C)	100 A/µs
Critical rate of rise of off-state voltage	500 V/µs
Gate trigger current / voltage (25°C)	60 mA / 2.5 V
Average gate power	0.5 W
Maximum peak reverse gate voltage	5.0 V
Maximum thermal resistance, junction to ceramic base per chip	0.9 °C/W
Operating junction temperature	-40 to 125°C
Isolation voltage	2500 Vrms
Weight (typical)	0.5 oz (14.4 g)

Technical document (PDF)  |  Request a quote for L514F (reply within 24 hours)