L321F Crydom - Power Transistor Module

L321F Description

The L321F from Crydom is a solid state relay with a 120 V / 15 A rating. Solid state relays like this switch heaters, motors, lamps and other loads quietly and without contact wear.

Looking for a replacement L321F? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom L321F is used for AC/DC power conversion and control: controlled rectifiers, DC motor drives, heater and power control, battery chargers and power supplies.

Key Specifications

Crydom L321F is an L Series low-profile PCB-mount SCR/diode power module, 15 A, circuit type 2, 120 VAC line, with free wheeling diode. Source: Crydom L Series datasheet (Rev 121411). Values at 25°C unless noted.

Parameter	Value
Maximum DC output current (Tc = 85°C)	15 A
AC line input voltage	120 Vrms (400 VRRM)
Circuit type	2 (see datasheet schematic)
Maximum voltage drop (VF)	2.2 V @ 15 A
Maximum non-repetitive surge current (1/2 cycle, 60 Hz)	225 A
Maximum I²t for fusing (8.3 ms)	210 A²s
Critical rate of rise of on-state current (Tj = 125°C)	100 A/µs
Critical rate of rise of off-state voltage	500 V/µs
Gate trigger current / voltage (25°C)	60 mA / 2.5 V
Average gate power	0.5 W
Maximum peak reverse gate voltage	5.0 V
Maximum thermal resistance, junction to ceramic base per chip	1.25 °C/W
Operating junction temperature	-40 to 125°C
Isolation voltage	2500 Vrms
Weight (typical)	0.5 oz (14.4 g)

Technical document (PDF)  |  Request a quote for L321F (reply within 24 hours)