H12WD48125PG Crydom - Relays

H12WD48125PG Description

The H12WD48125PG is a solid state relay made by Crydom. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent (Young & New Century LLC) supplies power modules, thyristors, diodes and other industrial components, including legacy parts. Contact us for a quote on the H12WD48125PG, and please confirm ratings against the datasheet before ordering.

Summary of Features

Target Applications

Crydom H12WD48125PG is used for switching AC loads in industrial heating and temperature control (ovens, furnaces, plastic molding and extrusion machines), packaging and food processing equipment, lighting control, HVAC systems and industrial automation.

Key Specifications

Crydom H12WD48125PG is a 125 A panel-mount solid state relay, H12WD Series (48-660 VAC, snubberless), SCR output, snubberless (low off-state leakage), 1200 Vpk transient rating, DC control, zero voltage turn-on, with overvoltage protection, input status LED. Source: Crydom H12WD Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage (47-440 Hz)	48-660 Vrms
Maximum load current	125 Arms
Transient overvoltage	1200 Vpk
Minimum load current	150 mArms
Maximum 1-cycle surge current (50/60 Hz)	1670/1750 Apk
Maximum on-state voltage drop @ rated current	1.15 Vrms
Maximum off-state leakage @ rated voltage	1.0 mArms
Minimum off-state dv/dt	500 V/µs
Maximum I²t for fusing, 1/2 cycle (50/60 Hz)	13950/12709 A²s
Thermal resistance junction to case (Rjc)	0.22 °C/W
Switching type	zero voltage turn-on
Input
Control voltage range	4-32 VDC
Minimum turn-on voltage	4.0 VDC
Must turn-off voltage	1.0 VDC
Input current	7-12 mA
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output/base	4000 Vrms
Ambient operating temperature	-40 to 80°C
Weight (typical)	2.6 oz (74.9 g)

Technical document (PDF)  |  Request a quote for H12WD48125PG (reply within 24 hours)